NOW
Ask for today's sterilizers
Midmark and Statim units are the most requested and move fastest. Call with the model you prefer and your instrument volume, and we will tell you what is here and what is being rebuilt.
Refurbished dental autoclaves & sterilizers · Southern California
A sterilizer that passes its spore test before it reaches you.
Midmark, Tuttnauer and SciCan Statim autoclaves rebuilt in our shop with new gaskets, elements and controls where needed, spore tested before delivery, and set up in your sterilization area by our technicians.
Based in City of Industry. Equipment sales, delivery and installation anywhere in California; delivery and installation are quoted by distance.
In the shop now
Sterilizers in the shop this week.
Listed only once a unit is in our City of Industry shop, rebuilt and spore tested. For a sterilizer failing its spore test today, start with emergency repair.
What a refurbished sterilizer includes
Rebuilt, then proven with a biological indicator.
A sterilizer is a pressure vessel with a heater and a door seal. Those are exactly the parts we replace and test.
GSK
Door gasket and seals
Door gasket, fill and vent valves and solenoids replaced where worn; the chamber holds pressure through a full cycle without leaking.
HTR
Heating element and sensors
Element, thermostat and temperature and pressure sensors tested so the unit reaches and holds sterilization temperature on every cycle.
CTL
Controls and cycle
Boards, displays and cycle logic verified; units with printers or USB logging are checked so your sterilization records work from day one.
BIO
Spore tested before delivery
A biological indicator is run in our shop before the unit ships, and we recommend you run your own on installation day and weekly after, as California requires.
For a failing sterilizer that is still in good condition, repair is usually cheaper than replacement; ask us to look first.
Choosing a sterilizer
Four questions that decide the unit.
Instrument volume
A busy hygiene schedule with pouches and cassettes needs chamber size and cycle speed; a second unit often solves the bottleneck better than a bigger one.
Cassette or chamber
Statim cassette units turn handpieces around in minutes; chamber units like the M11 handle full loads. Many offices run one of each.
Water and logging
Distilled-water routines and sterilization logs are part of the setup, not an afterthought; we show your team on installation.
Weekly spore testing
California requires weekly biological monitoring. Any sterilizer, new or refurbished, has to pass it every week; we make sure yours starts that way.
How a purchase works
From a phone call to a working operatory.
Tell us what you need
A chair for a new operatory, a compressor that died, a sterilizer for a second room. A brand or model helps but is not required.
We tell you what we have
What is in the shop today, what is being refurbished, and what we can source. Photos and the unit's history on request.
One written quote
The unit, the warranty, delivery and installation, each spelled out. Delivery and installation are quoted by distance from City of Industry.
Delivered and installed
Our own technicians deliver, connect, test and hand over the unit, and they are the same people you call for service afterwards.
Before you buy
Good questions. Straight answers.
Yes, as they come through the shop: Midmark M9 and M11, Tuttnauer manual and automatic models, and SciCan Statim 2000 and 5000 cassette units. Ask for what is available today.
Yes. A biological indicator is run in our shop before the unit ships. We also recommend running your own test on installation day so your log starts with a pass.
What is worn: the door gasket, valves and solenoids, the heating element, sensors and controls as needed. Every unit is run through full cycles and checked for leaks and temperature before it is listed.
Yes. Installation covers placement, water, power where needed, a test cycle and a walkthrough of the loading, water and logging routine with your sterilization lead.
Yes. Equipment sales, delivery and installation cover all of California. Most of our deliveries are across Southern California, from Santa Barbara and Ventura counties down to San Diego and out to the Inland Empire. Delivery and installation are quoted by distance from our City of Industry shop, and the quote is in writing before anything is scheduled.
Yes. Every refurbished unit we sell comes with a warranty. The period depends on the equipment type and its condition, and the exact terms are written into your quote so there is nothing to interpret later.
No. We do not buy doctors' equipment and we do not take trade-ins. The units we refurbish come through our own channels, and we only list a unit once it is in our shop.
Keep exploring
Guides & repair
Ask about a unit
Tell us what you need.
Tell us the model you prefer, your instrument volume, and the office location. We reply with what is in the shop and a written quote with installation.
This is an equipment inquiry, not a purchase, appointment or confirmed quote. No payment details are requested.
626-422-2315Phones are answered Mon–Fri 8AM–6PM and Sat 8AM–2PM. Equipment down now? Call instead of waiting on a reply.
English & Spanish